Betamotor EVO 4t Bedienungsanleitung PDF herunterladen (Seite 48)

ASSEM BLY

betamotor.com

After you have fitted the gearchange shaft, check

the axial play between the two pawls, which must

be between 0.50mm and 0.70mm. If this clearance

is exceeded, replace the movable pawl.

Position the spring (1) and the detent lever (2)

in their housing and hold them in place with the

idler pivot pin (3). Secure with the M6x25 bolt (4)

tightened to 10 Nm after applying medium-strength

thread lock.

Move the detent lever out of the way and fit the

detent cam (5). Secure with the M6x35 bolt (6)

tightened to 10 Nm after applying medium-strength

thread lock.

Threadlocker Blue

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 77 78

Keine Kommentare

Betamotor EVO 4t Bedienungsanleitung Seite 48